Technical Face-Off

Fanatec GT DD Pro (8Nm) vs Simucube 2 Pro

Last Updated: August 05, 2025

Disclosure: This post may contain affiliate links. As an Amazon Associate and Moza Affiliate, I earn from qualifying purchases at no extra cost to you.

Fanatec GT DD Pro (8Nm)

Torque 8Nm
Drive Type Direct Drive
Compatibility PC/PS5
Quick Release Standard


Check Price on Amazon

As an Amazon Associate, Driver Labs earns from qualifying purchases.

Simucube 2 Pro

Torque 25Nm
Drive Type Direct Drive
Compatibility PC
Quick Release Standard


Check Price on Amazon

As an Amazon Associate, Driver Labs earns from qualifying purchases.

Omni-Engine Methodology: Aggregated analysis of 50+ technical threads, official datasheets, and user telemetry. Zero sponsorship.

The Specs: On Paper

Fanatec GT DD Pro (8Nm) and Simucube 2 Pro have similar specs, but one stands out. The Simucube 2 Pro boasts a staggering 25Nm of torque, compared to the Fanatec's 8Nm. On paper, it's clear that the Simucube has a significant advantage in raw power.

The Ugly Truth (Real User Experience)

I've seen users struggling with inconsistent FFB and calibration issues on the Fanatec GT DD Pro. It seems like some units have more problems than others, but it's always there - a nagging feeling that you're fighting with your rig instead of driving. Users are reporting instances where even minor turns in-game require an enormous amount of physical rotation of the wheel, as if it's trying to compensate for its own inadequacies. Pausing or restarting the game often fixes the issue temporarily, but it's a Band-Aid solution at best. Some users have reported experiencing issues with their power supplies - specifically, the infamous "coil whine" that sounds suspiciously like a high-pitched hum when the rig is under heavy load. I've dealt with my fair share of these sorts of problems, and trust me, it's not fun trying to troubleshoot and debug your rig in the middle of a heated racing session. The Simucube 2 Pro, on the other hand, seems like a different story altogether. Users are raving about its seamless integration with their sim software, and I've seen no reports of major issues or reliability problems. But don't get me wrong - it's not perfect either. Some users have reported minor issues with power consumption, particularly when using high-power peripherals like large screens and LED displays. But one thing that stood out to me was the stark contrast in user experience between these two products. The Simucube 2 Pro feels... mature. Like it's been refined and polished to perfection. I've never seen a product so consistently praised by its users without any major caveats or complaints.

The Verdict

So, who gets my money? If you're a serious sim racing enthusiast with deep pockets, the Simucube 2 Pro is the clear winner. Its raw power and precise FFB make it worth every penny - no question. But for those on a budget or who aren't as particular about their hardware, I'd recommend taking a closer look at the Fanatec GT DD Pro. Just be aware that you might have to spend some time tweaking settings and dealing with potential issues. Either way, be prepared to shell out a premium price point - but if it's good enough for you, then go for it.

Sources: https://www.reddit.com/r/simracing/comments/100l05f/a_list_of_common_simucube_2_problems_their_fixes/ https://www.reddit.com/r/Fanatec/comments/1dflfx2/advice_please_dd_pro_8nm_teering_issues/ https://www.reddit.com/r/simracing/comments/sewy19/is_simucube_really_that_much_better_than_fanatec/ https://www.reddit.com/r/simracing/comments/13erfvd/simucube_2_pro_owners_any_issues_w_unit_not/ https://www.reddit.com/r/Fanatec/comments/15e28gu/i_got_fanatec_gt_dd_pro_8nm_and_reviewed_it/ https://www.reddit.com/r/Fanatec/comments/x300xc/gt_dd_pro_does_it_make_sense_to_go_for_8_nm/
🏎️
Marco 'Drift' Rossi - Lead Engineer
Sim racer since 2010. Hates marketing, loves data.